From cooling towers to adiabatic chillers and ice-banks - allow us to source the right equipment for your requirements.
Technology:
- Single-circuit cooling system with closed-loop water circulation
- Dual-circuit water system treatment with closed colling system
- Open circuit cooling system
- Preparation of supplying water for closed cooling water systems
- System water treatment for closed cooling water systems
- Preparation of cooling water for open cooling water systems
Open cooling towers
Cooling towers of the type HSA consist of the casing made of reinforced polyester, fillers and water drop eliminators made of PP material, axial fan with electromotor drive, system for distribution and dispersion of cooling water and air dampers at the air inlet. The casing is made of reinforced polyester which has a high corrosion resistance and related long life span. A part of the casing is also a collection tray – the lower case where a connector for cooling water is installed. Fillers and water drop eliminators are made of PP material, welded, thus enabling a high compactness, water temperature resistance up to 80°C and are ecologically more acceptable and with a longer life period than PVC fillers, which were more often used in the recent past.
Use: Thermoenergetics, food industry, petrochemical industry, pharmacy, ironworks, automotive industry, air conditioning systems
Air coolers
Air cooler housing is galvanised and painted with anti-corrosive paint. Each ventilation section of an air cooler is independent. Electric motors of fans are statically and dynamically balanced. Protective nets of fans meet the most demanding European standards. Aluminium fins and copper tubes are fitted in air coolers. Due to closed water system circulation there are no possibilities for formation of sediments or bacteriological pollution of the cooling system.
Use: air conditioning, skating rinks, cold rooms, breweries, drying rooms for cereals, ripening rooms for fruit and other complex cold room process.
Closed cooling towers
Cooling towers of the type consist of casing made of reinforced polyester, pipe register, water drop eliminators made of PP material, axial fan with electromotor drive, system for distribution and dispersion of cooling water and air dampers at the air inlet and circulation pump of the secondary part of the system. The casing is made of reinforced polyester, which has high corrosion resistance and related long life span. The pipe system consists of galvanized and stainless pipes. Water drop eliminators are made of PP material, welded, which enables high compactness, water temperature resistance up to 80°C and are ecologically more acceptable and with a longer life span than PVC eliminators which were more often used in the recent past.
Cooling towers are used in cooling systems, where water as a cooling medium must not or shall not come into contact with pollution or any other form of impurities.
Evaporative condenser
Evaporative condenser consists of the case made of reinforced polyester or galvanized metal sheets, pipe register, water drop eliminator made of PP material, an axial/ radial fan with an electromotor drive, distribution and spraying system of cooling water and circulation pump of the secondary part of the system. The pipe system is made of galvanized and stainless pipes. Water drop eliminators are made of PP material – welded – thus enabling high level of compactness and resistance to water temperature up to 80°C. They are ecologically more acceptable and with a longer life span than PVC eliminators which were more used in the recent past.